Best Bedroom Nightstands of 2026

Two fabric drawers, an open shelf, and a charging strip that includes USB-C: that combination is why this is the nightstand we recommend first. At 23.6 inches tall it sits at a natural reach from a standard mattress, and at 11.8 inches deep it slides into the gap beside the bed that most furniture is too deep for. The 15.7-inch width still leaves room for a lamp and a glass.

The power strip is set flush into the top, and that detail does more than it sounds like: the lamp cord plugs in beside the lamp instead of disappearing behind the table, and the USB-C port takes a newer phone or tablet without an adapter. Two AC outlets, one USB-A, and one USB-C is enough for a lamp, a phone, and a watch charger at once.

Particleboard panels and a powder-coated steel frame carry two non-woven fabric drawers and an open shelf at one side. Fabric drawers are what the money buys at this level, and these hold their shape and slide cleanly; the shelf is where the book you are actually reading ends up. Assembly is numbered parts and included tools, and adjustable feet sort out a floor that isn't level.

The stated top load is 26.6 pounds, on the light side for this group, so treat the top as a lamp-and-phone surface rather than a place for a printer or a heavy speaker; the steel VASAGLE is rated for 44 pounds if that's the job. What keeps us coming back is the open shelf. It swallows the book, the glasses, and the remote that would otherwise end up on the floor, and it does it without another drawer to open in the dark.

Two tables in one order, both with a charging strip built into the back edge: one three-prong outlet, one USB-A, one USB-C. At 15 inches along the front and 11 inches deep they are the shallowest tables here, which is exactly what makes them work in a room where the bed is already pushed against the wall.

The pair is the real argument. Matching both sides of a bed usually means buying twice and hoping the second one is still in stock, and this does it in a single order for roughly what one of the pricier single tables here costs. Two open shelves each, adjustable feet, and a steel-and-particleboard build fill out the rest.

Height is the compromise: 21.7 inches is a couple of inches lower than the Huuger and the Lazzanto, so it suits a low bed or the back of a sofa better than a tall mattress. The 4.9-foot cord is short, so you want a wall outlet near the head of the bed rather than across the room. Neither point rules it out in a guest room, which is where this pair does its best work.

This is the one that isn't flat-pack furniture. It costs several times what the steel-and-fabric tables here cost, and it turns up assembled apart from four feet you bolt on — no bag of bolts, no Allen key, no hour on the floor. For a bedroom that will keep its furniture for a decade, that's the shape of the purchase.

What the money buys: 17 inches of depth and 27 of width, three dovetail drawers on smooth glides, veneers and engineered wood under a chipped-white two-tone finish with bronze-tone pulls, and a USB charging station at the back on a 9-foot cord. The 28-inch height suits a taller bed, so check it against your mattress before you commit. These are the only wood-on-glide drawers in this group, and they are why the piece feels like furniture rather than a kit.

We think it earns the money in a main bedroom, with one caveat worth acting on: units do turn up with a cracked drawer or a split panel, so open the carton and pull every drawer out before the packaging goes to the curb. The distressed white-and-brown finish is the other draw — it gives a bedroom the cottage look without a matching suite.

Twenty point nine inches is the number that decides this one. That's two or three inches lower than most of the tables here, which makes it the right shape beside a low platform bed, a kid's bed, or a futon, and the wrong one beside a tall mattress where you're reaching down in the dark for your glasses.

Two fabric drawers, a wipe-clean wooden top, and a steel frame on four self-levelling feet. The drawers lift right out, which we rate as the most useful thing about it: carry one to the closet for a sort-out, or pull it out and use the opening for a stack of magazines.

There's no charging here, and the 35-pound top rating covers a lamp and a couple of books without stretching to a printer. Assembly runs about 15 minutes with the included tools. What we appreciate is the honesty of the thing — at 7.9 pounds it's light enough to move with one hand, and it does bedside storage without pretending to be a dresser.

Thirteen point four inches wide and 11.8 deep, this is the slimmest footprint in the group that still gives you three usable levels. It's a steel frame with rustic-brown panels: a top rated for 44 pounds and two shelves below it, the upper two within easy reach from a bed.

We like it best as a shelf rather than a dresser. A lamp, a glass of water, and the book you're reading live on top, with two tiers underneath for everything else — which suits a guest room or a reading corner better than a shared bedroom, where clutter wants a door on it.

The 44-pound top rating is the strongest of the small open tables here, so a heavy lamp or a stack of hardbacks isn't a worry. There are no drawers and no power, and the assembly is four steps and 10 to 15 minutes with the tools in the box. On carpet the adjustable feet keep it from rocking.

The outlets sit in the left-hand vertical panel rather than on the top, and once you picture a mug of tea at two in the morning, that placement stops looking like a quirk. Two AC sockets and two USB-A ports on an ETL-listed charging station, set below the surface so a spilled drink runs past them rather than into them.

The top lifts on a hinge to reveal a shallow compartment — phone, glasses, remote, the things that get knocked onto the floor at night — and two open shelves sit underneath. At 23.6 inches long, 11.8 wide, and 23.8 tall it's a narrow console rather than a cube, so it wants a wall or the side of the bed running alongside it.

Steel and engineered wood, 17.7 pounds, adjustable feet, and a 100-pound load rating that is the highest in this group and far more than a bedside table ever needs. Assembly is numbered parts, included tools, and a video if you want one.

We think this is the one for a bedside where drinks actually live, and for anyone who wants the charging out of sight instead of glowing at them from the tabletop. The trade-off is that nothing is hidden except the compartment: shelves and a lid, but no drawer to sweep a charger and a notebook into.

No tools at all: the panels push onto plastic tubes and the whole thing stands up in minutes, which is the reason to look at it. At 6.2 pounds you can carry it up a flight of stairs under one arm and set it down beside a guest bed without asking for help.

Three open tiers at 20 pounds a level, 13.4 inches wide by 11.5 deep — the second-narrowest here after the VASAGLE — with rounded corners that matter in a kid's room, FSC-certified engineered wood, and a one-year warranty.

Where it gives ground is the frame. The plastic tubes are the least sturdy part of the design, and on a hard floor the light build shifts when you knock it. It still earns a place in a guest room, a dorm, or a first apartment: behind this group on rigidity and near the bottom on price, it does the job for a few years and asks nothing of you in assembly.

The LED strip is the reason this nightstand exists, and it earns its place in two situations: a kid's room that needs a nightlight, and a dark bedroom where fumbling for a lamp to find your phone is the last thing you want. Colour and brightness come from a switch on the cord or an app, with a timer if you want the light to fade out.

Charging sits on the rear board rather than the top — two AC outlets and two USB-A ports — so nothing glows at eye level and the tabletop stays clear for a lamp and a book. There's no USB-C, which is the spec we miss most.

Two fabric drawers and an open shelf, 11.4 inches deep by 15.6 wide and 24.4 tall, which makes it the tallest of the small tables here and the best match for a high mattress. Assembly is the longest of the group at 30 to 60 minutes, and the frame is particleboard and black-coated metal on adjustable feet.

Buy it for the light and the black finish rather than the electronics, and the piece makes sense: as a bedside table for a teenager's room it's the most fun thing in this roundup. In a guest room that gets used twice a year, the drawer space of the Huuger is the better spend and you won't miss the app.